ANTALYA, Türkiye, November 18, 2026 – East Asia's steelmakers and auto brands have a historic opportunity to lead the global steel industry onto a green race towards becoming crucial contributors to climate safety, five climate and industry advocacy groups have made the call at the United Nations Climate Change Conference known as COP31.
The steelmaking industry generates roughly 10% of global carbon dioxide emissions, with steelmakers from China, Japan, and South Korea accounting for 61% of global crude steel output. While rapidly expanding their overseas sales and investments, steelmakers in China, Japan, and South Korea are caught between early low-carbon pilots and new investments that lock in coal-based blast furnaces for decades, as regional automakers signal lukewarm interest in green steel without signing binding procurement contracts. The three economies have a critical role to play in preventing the "35 by 35" goal from being further locked into fossil fuels. More importantly, the new green technologies being tested out in East Asia could soon lead the global steel industry into a decarbonization trajectory.
On November 18, People of Asia for Climate Solutions (PACS) hosted "Decarbonization of the Steel and Auto Industries in East Asia" at the Asia Climate Solutions Pavilion in the COP31 Blue Zone. Speakers from China, Japan, South Korea, and international climate organizations examined coal-based capacity phase-out, green steel standards, and downstream procurement across the automotive supply chain.
"You cannot decarbonize the world without decarbonizing East Asian steel," said Xiaojun (Tom) Wang, Executive Director of PACS, who moderated the session. "All three countries are testing technologies, with a long way to go from demonstration to commercialization. What East Asia builds, invests in, and exports will determine the future of global steel and the future of global climate," Wang added.
Tracking China's Top 30 Steelmakers and Shifting Beyond Output Cuts
China produced 960.8 million tonnes of crude steel in 2025, accounting for 52% of global output and over 60% of global steel-sector carbon emissions. Domestically, steel is the country's second-largest industrial emitter, generating roughly 15% of national carbon emissions and consuming 11% of total energy. Under its 2035 Nationally Determined Contribution (NDC), China has pledged to cut economy-wide net greenhouse gas emissions by 7% to 10% from peak levels, raise non-fossil fuels to over 30% of energy consumption, and expand wind and solar capacity to 3,600 gigawatts (GW).
To translate national targets into corporate accountability, eight Chinese grassroots NGOs, including Shanxi Green Youth, Green Action from Hebei and Shanghai Qingyue, have launched an initiative to assess and monitor the progress by China’s 30 top steel makers, Wang introduced. “Together, they represent 670 million tonnes of annual output, or more than half of national production. Meanwhile, they are also testing technologies with different commercialization maturity levels.”
"We will be keeping an eye on these top 30 steelmakers for the coming ten years, until they become constructive contributors to help China achieve its NDC target by 2035," Wang added, introducing the first edition of the tracking report Sharing the Responsibility: Steelmakers’ Critical Role in Delivering on China’s 2035 Nationally Determined Contributions.
Fei Li, Founder of Green Action from Hebei, noted that over the past decade, China has used capacity elimination, capacity replacement, and output controls to cut crude steel production from its 2020 peak of 1.065 billion tonnes to 961 million tonnes in 2025. That five-year reduction of 104 million tonnes exceeds the entire 2025 crude steel output of the United States. While output cuts have driven substantial emissions reductions, Li stressed that deeper decarbonization requires changing production processes. Electric arc furnaces (EAF) now account for roughly 20% of China's operational steel capacity, though scrap supply remains a constraint. Even in Hebei Province, China's traditional blast-furnace steelmaking hub, more than 6.775 million tonnes of EAF capacity is under construction or preparing to come online, alongside over one million tonnes of operating hydrogen metallurgy and smelting reduction capacity.
"Output cuts alone will not decarbonize the sector without firm blast furnace phase-out timelines, traceable carbon standards, and binding automaker orders," Wang noted.
When Will Automakers Turn Green Steel Demand Signals into Orders?
Once upstream low-carbon steelmaking capacity is built, downstream willingness to pay becomes the decisive bottleneck. Li pointed out that producing low-carbon steel carries higher costs, yet domestic policy incentives for green procurement remain limited in China. "When downstream customers do not have that demand, steelmakers have no reason to deliver products at a higher cost to themselves," said Li. "The green premium needs to be shared."
As a high-value steel buyer, the automotive sector is critical to absorbing this green premium. Wenjie Liu of the Sunrise Project noted that the Lead the Charge initiative has tracked automakers' demand for green steel for five consecutive years, finding that Asian automakers are narrowing the gap with long-time leaders in Europe and North America. Its 2026 leaderboard evaluated 18 global automakers across more than 80 indicators covering supply chain decarbonization and responsible sourcing. Tesla, Ford, and Volvo took the top three spots globally, while Geely surpassed Hyundai for the first time to become the highest-ranked Asian automaker at eighth and ninth respectively, with Kia ranking eleventh.
"While automakers in China, Japan and South Korea are all sending demand signals to their steel suppliers, they have so far translated these signals into actual procurement contracts to a much more limited extent than their European and North American counterparts," said Liu. "This is an area where Asian automakers need to accelerate their efforts."
Iron Feedstock for Japan's New Electric Furnaces and the Lifespan of Korea's Aging Blast Furnaces
In Japan and South Korea, researchers highlighted the tension between long-term net-zero roadmaps and near-term decisions on iron feedstock, green steel standards, and blast furnace life extensions.
Yuko Nishida of Japan's Renewable Energy Institute (REI) noted that recent emission declines in Japan's steel sector have resulted primarily from lower production volumes. On a direct emissions basis, steel accounted for 46% of Japan's industrial CO2 emissions in fiscal year 2023. JFE Steel plans to commission a large-scale EAF in Kurashiki in the first quarter of FY2028, while Nippon Steel plans to start up an EAF in Yahata in the second half of FY2029. How much carbon these new electric furnaces actually cut, Nishida argued, depends on what iron feedstock goes into the furnace and where the electricity comes from. She recommended expanding renewable electricity procurement and developing import channels for green hydrogen-based direct reduced iron (DRI) to progressively replace blast furnace pig iron.
Downstream buyers also need transparent carbon labels. Japan has incorporated automakers' low-carbon steel procurement plans into its clean energy vehicle subsidy evaluation, offering buyers an additional subsidy of up to 50,000 yen (roughly US$330) for eligible models. Under Japan's current "GX Steel" policy, however, companies can use a mass-balance approach to concentrate emission reductions achieved across production onto selected steel products. Nishida called for unified Carbon Footprint of Products (CFP) standards across all steel products so buyers can compare actual production emissions, alongside integrating embodied emissions from material manufacturing into decarbonization rules for automobiles and buildings.
Hyesung An of South Korean climate organization Solutions for Our Climate (SFOC) similarly argued that green steel grading should be based on traceable actual emission intensity while accounting for scrap ratios. South Korea's Special Act on Enhancing Steel Industry Competitiveness and Carbon Neutrality Transition took effect in June 2026, followed by the government's national Green Transformation strategy (K-GX) in October. While the government plans to commercialize hydrogen-based ironmaking starting in 2037, steelmakers are deciding right now whether to continue investing in existing blast furnaces.
On November 12, South Korea's largest steelmaker POSCO began a comprehensive relining of its Gwangyang No. 2 blast furnace under a contract worth approximately 305.1 billion won (over US$225 million). The company stated that equipment inspections identified safety hazards requiring a full overhaul. However, South Korean civil society groups including SFOC estimate that operating the furnace for another 15 years after relining will generate at least 137 million tonnes of CO2 emissions.
"Korea’s steel transition is at a critical juncture. The policy framework is taking shape, but the substance and direction of the transition are still being defined," said An. "Policies now need to be strengthened to support long-term transformation, alongside a clear approach to how existing coal-based assets will be progressively phased out. If we fail to act now, Korea’s steel transition risks losing both momentum and direction."
Overseas Investments Are Reshaping Steelmakers' Choices
Caroline Ashley, Executive Director of SteelWatch, compared progress across the three countries in four areas: carbon pricing, green steel standards, blast furnace retirement and site transition, and green iron supply. Pointing to China's expansion of its national carbon market to cover the steel sector and East Asian steelmakers' exploration of green ironmaking routes, she acknowledged policy and technological progress while warning that reinvestment in coal-based blast furnaces could keep steel mills reliant on coal for decades.
At the same time, cross-border investments are reshaping how East Asian steelmakers source iron and deploy capacity. South Korea's Hyundai Steel is advancing a DRI and EAF steelmaking project in Louisiana in the United States to supply local automakers. Japan's JFE Steel, trading house ITOCHU, and UAE steelmaker EMSTEEL have launched feasibility studies on supplying low-carbon DRI from the United Arab Emirates to JFE's planned EAF in Kurashiki. Addressing Chinese steelmakers' acquisitions of existing European steel plants and construction of new mills in Southeast Asia, Fei Li said: "We hope that as Chinese steel companies expand abroad, they will bring with them not only operational efficiency, but also technologies for a low-carbon transition."
"The global journey to steel decarbonisation is essential, but so far, too slow. In China, Japan and South Korea, we are seeing some good first moves, such as governments creating incentives and companies exploring routes to green iron, but we are seeing bad steps, such as reliance on coal-based blast furnaces for decades ahead," said Ashley. "In each country we need to see a transition out of blast furnaces, long-term investment in securing green iron, robust standards for the carbon footprint of steel, and growth of carbon pricing."
Ashley added: "What happens in the East Asia region affects the globe. The faster these countries move, the faster others will move too in a race for green steel and a safer planet."
Together, China, Japan, and South Korea hold a unique opportunity to lead the global transition toward low-carbon steelmaking. By pairing decisive blast furnace phase-outs and green iron investments with binding procurement commitments from the region's automotive industry, East Asia's three industrial powerhouses can set the pace for global steel decarbonization and build a cleaner industrial supply chain worldwide.